The Case

Bob is built in a Peli case. The 1400 to be precise. If you do not have one laying around, buy one without foam.
https://www.amazon.de/dp/B000M4450K

Electronical Components

The biggest expenses are going to be the electronic components. Please order these exact parts so everything fits in BOB. You may click the Check boxes to keep an overview.

Logilink Wireless Keypad

 The size of this numpad is very important to get right. We advise the Wireless ID0120 version but the wired ID0184 also fits, though the double '00' key was annoying in our testing.
https://www.amazon.de/dp/B00KYPJAMK

Stream Deck XL module

The stream deck XL is by far the most useful module in BOB, note we're using the module, not the plastic desktop version. The USB-C connection is fragile, be careful with it.
https://www.elgato.com/eu/en/p/stream-deck-module-32-keys

Intech Studio Grid Series 3 EF 44 fader module

Any intech module will fit in BOB, through testing we found the EF44 to work best. If you bought some other ones previously, you can use those as well. These require specific settings to work well, follow the build guide to set these up.
Order 2 of these.
https://www.thomann.de/be/intech_studio_grid_series_3_ef44_detent.htm

Nexus V-mount Battery 14.4V/12.8AH/184WH

We're using every USB out and input on this unit, the size clears the intech faders by a couple of milimeters and the weight counterbalances the ipad in the lid. It's quite important to buy this exact model. If you have a v-lock laying around with similar specs, you can always try that one out before ordering this one.
https://www.tseportal.nl/shop/battery/fxlion-nexus-v-mount-battery-14-4v-12-8ah-184wh/

UGREEN Nexode 100W USB C charger

 Any 100w Charger will do, but this one fits neatly in the case. The holes in the yellow cable management plate are made for this unit. This is a widely available charger, available worldwide in your local voltage and plug. 
https://www.amazon.de/dp/B091TV6LWN/

HangTon D-Tap to USB-C Power Adapter

D-Tap 12v to USB-C 100w adapter. We tried others but this one doesn't get as hot. 
https://www.amazon.de/dp/B0FHKN8CKQ

Noctua NF-A4x10 FLX, 3-Pin Premium Cooling Fan (40mm, Brown)

A silent fan to extract hot air, mostly generated whilest charging the battery. All needed cables and screws are provided in this kit. You will need to solder a male D-tap connector to the cable. 
https://www.amazon.de/dp/B009NQLT0M?

Cables, hubs, bits and bobs.

We recommend using high quality USB cables to connect all your peripherals. For the 1ste gen Cerise owners/users, some trial and error might be required as these units are notoriously picky about their cables and hubs. If you're in the market for a transmitter we recommend using another Belgian product, the Steady Node.

https://steady-node-micro-marty-767623931496.us-west1.run.app/

NOVOO 7 in 1 USB C hub

Any hub will do but we found it challenging to find  one with 4 USB ports, an RJ45 connection and 100w PD. This one has it all. If you're looking for another one, please note that these ports are the minimum required.
https://www.amazon.de/dp/B0957DFS8V

D-Tap plugs male & female

 You will need to solder a couple of D-Tap plugs to cables. In total 3 male plugs will be used and one female. I used the following.
https://www.amazon.de/dp/B0853ZXKLL
https://www.amazon.de/dp/B08NP39VZD

D-tap Splitter 1 to 3

Any Splitter will do but I suggest getting one with a horizontal layout.
https://www.amazon.de/dp/B08TWNJHF8

19mm 12V power button

This button turns the power from your V-Lock battery on and off, Try finding one with detachable cables and 10 a if possible, though mine is 5A and hasn't been an issue.
https://www.amazon.de/dp/B08J7LQC28

Loose USB C cables 

USB C panel mount back plate

This is the USB C port on the back of the case.
https://www.amazon.de/dp/B0FQNPK1SQ

USB C panel mount top plate

This is the USB C port on the top plate.
https://www.amazon.de/dp/B0CQ4VD2N2

12V Panel mount

This is the 12v port on the back of the case.
https://www.amazon.de/-/en/dp/B0C6MFNFZN

Neutrik NE8 FDX-P6-W

This is the RJ45 connector on the back panel.
https://www.thomann.de/be/neutrik_ne8_fdx_p6_w.htm

Neutrik NAC3PX-TRUE1

This is the power con in/out on the back panel.
https://www.thomann.de/be/neutrik_nac3px_true1.htm

V Mount Battery plate

The battery plate to lock our V-lock battery in the case. Any will do.
https://www.amazon.de/-/en/gp/product/B00X5L1NWU/

Manfrotto 16mm female adapter

The stand adapter that's hidden in the flip up compartment on the top plate. This screws on the bottom and allows mounting your BOB on a stand.
https://www.amazon.de/dp/B000LJDHFU

Short extension Cable

We cut off the male plug of this cable and attach it to the True Con power input. But you can just take a 30cm cable and add a female plug on it.
https://www.amazon.de/dp/B0CXH51L4W

Short Ethernet cable

This cable goes from the RJ45 port on the back to the USB hub inside of the case. Find a short one and flexible if possible. These cables are fragile, avoid twisting them too much.
https://www.amazon.de/dp/B074V6KNZQ